$ USD
  • $ USD
  • $ CAD
  • € EUR
  • £ GBP
  • $ AUD
  • ₩ KRW
  • ¥ JPY
  • ₪ ILS
  • ¥ CNY
  • kr SEK
  • CHF CHF
  • kr NOK
  • RM MYR
  • $ SGD

Holiday Shipping & Production Dates For 2023

July 1, 2024, 8:00 PM MST - We are currently making changes to our product discounting system. Discounts may not be displayed or may be inaccurate.

Request Quote

Holiday Shipping & Production Dates For 2023

On August 20, 2023, the Luxeon Star LEDs website transitioned to a new hosting service. If you're a returning customer, you will need to reset your password to maintain your account security. You can reset your password here.

4000K LUXEON Z White LED on a Saber Micro-Z1 5mm Square Base – 134 lm @ 500mA

Regular Price: $6.46 /ea

The SM-01-K5 high power Micro-Z1 LED module features a single LXZ1-4070 high brightness White LUXEON Z LED soldered to a thermally efficient, 5 mm square, thermally optimized MCPCB aluminum base. It stands out as the most compact high-power LED module that can be worked with using conventional benchtop tools and manual soldering methods.

This module is ideal for R&D, maintenance, repair, and operations (MRO), low- to medium-scale manufacturing, and educational purposes.

SM-01-K5

Discount Pricing

In Stock
5 Can ship immediately
Additional Stock Lead Time
4-8 Days
Product Status
Normally stocked
Minimum order quantity
1
Manufacturer
Quadica Developments
Quantity Discount
10-24 5%
25-49 10%
50+ 15%
In Stock
5 Can ship immediately
Additional Stock Lead Time
4-8 Days
Product Status
Normally stocked
Minimum order quantity
1
Manufacturer
Quadica Developments
Datasheet

Discount Pricing

Quantity Discount
10-24 5%
25-49 10%
50+ 15%

5 in stock

Configured Total

Compatible Products

App Notes

Specs

Drivers

Optics

Cooling

Documents & Compliance

Thermal Management

The SM-01-K5 Micro Z1 LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet. We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module. The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Optic Compatibility

The SM-01 is compatible with any optic certified for use with the LUXEON Z series of LEDs. There are no optic alignment holes or notches, so the designer will need to ensure that the LED is correctly aligned under the secondary optic.

Carrier Tab

Saber SM-01 5mm LED module carrier tab. The Saber Micro-Z1 is provided as part of a Carrier Tab. The tab is v-scored, so the LED module can be easily separated from the carrier. The carrier tab makes it easier to handle the Saber Z1 during transport, storage, and assembly, minimizing the risk of damage to the LED-emitting surface.

Connection Soldering

Due to its small size, soldering connecting wires to the Micro-Z1 module will require medium to advanced soldering skills. To help, the carrier tab includes 16 soldering practice pads where you can refine your small-part soldering skills before you solder leads to the module.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 2,000 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 2,000+ quantities, please contact us for binning details. You can learn more about LED binning here.

LED ColorWhite
Recommended Operating Current500 mA
Maximum Rated Drive Current1000 mA
Maximum Pulse Current1200 mA
Typical Forward Voltage2.8 Vf
Maximum Forward Voltage3.25 Vf
Lumens @ 350 mA101 lm
Lumens @ 700 mA172 lm
Typical Wavelength4000 K
Color Rendering Index70 CRI
Beam Angle120°
Typical Forward Voltage2.8 Vf
Thermal Resistance7.5 °C/W
Maximum Recommended Junction Temp135 °C
Operating Temperature Range-40 to 135 °C
Dimensions (L x W x H)5 x 5 x 1.5 mm
Weight1.2 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SM-01-K5 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics except the Polymer 15 mm optic are 100% compatible with the SM-01-K5 LED module. Polymer 15 mm optics cannot be used if you select the connector option.

Note: The optics listed here may not be ideal for ultraviolet or infrared LEDs. You will need to test the optic for your specific application.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA

Thermal Management

The SM-01-K5 Micro Z1 LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet. We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module. The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Optic Compatibility

The SM-01 is compatible with any optic certified for use with the LUXEON Z series of LEDs. There are no optic alignment holes or notches, so the designer will need to ensure that the LED is correctly aligned under the secondary optic.

Carrier Tab

Saber SM-01 5mm LED module carrier tab. The Saber Micro-Z1 is provided as part of a Carrier Tab. The tab is v-scored, so the LED module can be easily separated from the carrier. The carrier tab makes it easier to handle the Saber Z1 during transport, storage, and assembly, minimizing the risk of damage to the LED-emitting surface.

Connection Soldering

Due to its small size, soldering connecting wires to the Micro-Z1 module will require medium to advanced soldering skills. To help, the carrier tab includes 16 soldering practice pads where you can refine your small-part soldering skills before you solder leads to the module.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 2,000 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 2,000+ quantities, please contact us for binning details. You can learn more about LED binning here.

LED ColorWhite
Recommended Operating Current500 mA
Maximum Rated Drive Current1000 mA
Maximum Pulse Current1200 mA
Typical Forward Voltage2.8 Vf
Maximum Forward Voltage3.25 Vf
Lumens @ 350 mA101 lm
Lumens @ 700 mA172 lm
Typical Wavelength4000 K
Color Rendering Index70 CRI
Beam Angle120°
Typical Forward Voltage2.8 Vf
Thermal Resistance7.5 °C/W
Maximum Recommended Junction Temp135 °C
Operating Temperature Range-40 to 135 °C
Dimensions (L x W x H)5 x 5 x 1.5 mm
Weight1.2 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SM-01-K5 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the SM-01-K5 LED module.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA