$ USD
  • $ USD
  • $ CAD
  • € EUR
  • £ GBP
  • $ AUD
  • ₩ KRW
  • ¥ JPY
  • ₪ ILS
  • ¥ CNY
  • kr SEK
  • CHF CHF
  • kr NOK
  • RM MYR
  • $ SGD
Request Quote

Holiday Shipping & Production Dates For 2024

Blue (470nm) Rebel LED on a SinkPAD-II 10mm Square Base – 65 lm @ 700mA

Regular Price: $10.18 /ea

The SP-05-B4 high power LED module features a single LXML-PB01-0040 high brightness Blue Rebel LED soldered to a SinkPAD-II 10mm square base.

SinkPAD-II technology minimizes thermal resistance by eliminating the dielectric layer so that the LED thermal pad is soldered directly to the aluminum base. This ensures the lowest possible LED junction temperature, resulting in increased LED life, light power output, and overall reliability.

SP-05-B4

Discount Pricing

In Stock
22 Can ship immediately
Additional Stock Lead Time
3-4 Days
Product Status
Normally stocked
Minimum order quantity
1
Manufacturer
Quadica Developments
Quantity Discount
10-24 5%
25-49 10%
50-99 15%
100-249 20%
250-999 25%
1000+ 30%
In Stock
22 Can ship immediately
Additional Stock Lead Time
3-4 Days
Product Status
Normally stocked
Minimum order quantity
1
Manufacturer
Quadica Developments
Datasheet

Discount Pricing

Quantity Discount
10-24 5%
25-49 10%
50-99 15%
100-249 20%
250-999 25%
1000+ 30%

22 in stock

Configured Total

Compatible Products

App Notes

Specs

Drivers

Optics

Cooling

Documents & Compliance

Thermal Management

The SinkPAD-II SP-05-B4 module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 1,000 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 1,000+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED ColorBlue
Recommended Operating Current350 mA
Maximum Rated Drive Current1000 mA
Maximum Pulse Current1000 mA
Typical Forward Voltage2.95 Vf
Maximum Forward Voltage3.51 Vf
Lumens @ 350 mA41 lm
Lumens @ 700 mA66 lm
Wavelength Range460 to 485 K
Beam Angle125°
Thermal Resistance10.7 °C/W
Maximum Recommended Junction Temp150 °C
Operating Temperature Range-40 to 135 °C
Dimensions (L x W x H)10 x 10 x 3.7 mm
Weight0.3 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SP-05-B4 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics except the Polymer 15 mm optic are 100% compatible with the SP-05-B4 LED module. Polymer 15 mm optics cannot be used if you select the connector option.

Note: The optics listed here may not be ideal for ultraviolet or infrared LEDs. You will need to test the optic for your specific application.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA

Thermal Management

The SinkPAD-II SP-05-B4 module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 1,000 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 1,000+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED ColorBlue
Recommended Operating Current350 mA
Maximum Rated Drive Current1000 mA
Maximum Pulse Current1000 mA
Typical Forward Voltage2.95 Vf
Maximum Forward Voltage3.51 Vf
Lumens @ 350 mA41 lm
Lumens @ 700 mA66 lm
Wavelength Range460 to 485 K
Beam Angle125°
Thermal Resistance10.7 °C/W
Maximum Recommended Junction Temp150 °C
Operating Temperature Range-40 to 135 °C
Dimensions (L x W x H)10 x 10 x 3.7 mm
Weight0.3 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SP-05-B4 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the SP-05-B4 LED module.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA