$ USD
  • $ USD
  • $ CAD
  • € EUR
  • £ GBP
  • $ AUD
  • ₩ KRW
  • ¥ JPY
  • ₪ ILS
  • ¥ CNY
  • kr SEK
  • CHF CHF
  • kr NOK
  • RM MYR
  • $ SGD
Request Quote

Holiday Shipping & Production Dates For 2024

4 Series Connected LUXEON Z Deep Red LEDs on a Saber Z5 20mm Base – 1300 mW @ 500mA

Regular Price: $20.08 /ea

The SZ-05-H5 LED module can produce 1400 mW of light when powered at 500mA, and with proper cooling could be pushed even higher.

This remarkable level of light output is accomplished with 4 tightly positioned, series connected, LXZ1-PA01 Deep Red LUXEON Z LEDs soldered to a thermally efficient, 20mm (0.8″) square MCPCB aluminum base.

This ready-to-use LED module offers easy handling and a small size compatible with standard benchtop tools and hand soldering methods. It is suitable for R&D, maintenance, repair, and operations (MRO), low- to medium-scale manufacturing and educational purposes.

A color mixing version of this module is also available.

SZ-05-H5

Discount Pricing

In Stock
6 Can ship immediately
Additional Stock Lead Time
3-4 Days
Product Status
Normally stocked
Minimum order quantity
1
Manufacturer
Quadica Developments
Quantity Discount
10-24 5%
25-49 10%
50+ 15%
In Stock
6 Can ship immediately
Additional Stock Lead Time
3-4 Days
Product Status
Normally stocked
Minimum order quantity
1
Manufacturer
Quadica Developments
Datasheet

Discount Pricing

Quantity Discount
10-24 5%
25-49 10%
50+ 15%

6 in stock

Configured Total

Compatible Products

App Notes

Specs

Drivers

Optics

Cooling

Documents & Compliance

Thermal Management

The SZ-05-H5 Saber Z5 LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

Bench testing that we have conducted with SZ-05 modules with all LEDs powered at 700mA in an open-air environment and an ambient temperature of 25°C has indicated that a heat sink with a thermal rating of 10 C°/W or lower should be adequate. However, you will need to perform your own testing and analysis to determine if this size of heat sink will be suitable for your application.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Optic Compatibility

The Saber Z5 has been specifically designed to accommodate any Carclo 20mm optic that can be mounted into the Carclo 20mm Pegged Foot Optic Holder.

We currently do not carry these optics; however, the Saber Z5 is also compatible with:

Mixed Color LEDs

Need different color LEDs mounted to a single Quad LED module? A color-mixing version of this module is available.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities of less than 500 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 500+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED ColorDeep Red
Radiometric Power @ 500 mW1400 mW
Peak Wavelength660 nm
Recommended Operating Current500 mA
Maximum Rated Drive Current700 mA
Maximum Pulse Current700 mA
Typical Forward Voltage8.8 Vf
Maximum Forward Voltage11 Vf
Wavelength Range650 to 670 K
Beam Angle145°
Thermal Resistance10 °C/W
Maximum Recommended Junction Temp135 °C
Operating Temperature Range-40 to 120 °C
Dimensions (L x W x H)20 x 20 x 2.3 mm
Weight1.6 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SZ-05-H5 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics except the Polymer 15 mm optic are 100% compatible with the SZ-05-H5 LED module. Polymer 15 mm optics cannot be used if you select the connector option.

Note: The optics listed here may not be ideal for ultraviolet or infrared LEDs. You will need to test the optic for your specific application.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA

Thermal Management

The SZ-05-H5 Saber Z5 LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

Bench testing that we have conducted with SZ-05 modules with all LEDs powered at 700mA in an open-air environment and an ambient temperature of 25°C has indicated that a heat sink with a thermal rating of 10 C°/W or lower should be adequate. However, you will need to perform your own testing and analysis to determine if this size of heat sink will be suitable for your application.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Optic Compatibility

The Saber Z5 has been specifically designed to accommodate any Carclo 20mm optic that can be mounted into the Carclo 20mm Pegged Foot Optic Holder.

We currently do not carry these optics; however, the Saber Z5 is also compatible with:

Mixed Color LEDs

Need different color LEDs mounted to a single Quad LED module? A color-mixing version of this module is available.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities of less than 500 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 500+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED ColorDeep Red
Radiometric Power @ 500 mW1400 mW
Peak Wavelength660 nm
Recommended Operating Current500 mA
Maximum Rated Drive Current700 mA
Maximum Pulse Current700 mA
Typical Forward Voltage8.8 Vf
Maximum Forward Voltage11 Vf
Wavelength Range650 to 670 K
Beam Angle145°
Thermal Resistance10 °C/W
Maximum Recommended Junction Temp135 °C
Operating Temperature Range-40 to 120 °C
Dimensions (L x W x H)20 x 20 x 2.3 mm
Weight1.6 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SZ-05-H5 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the SZ-05-H5 LED module.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA