$ USD
  • $ USD
  • $ CAD
  • € EUR
  • £ GBP
  • $ AUD
  • ₩ KRW
  • ¥ JPY
  • ₪ ILS
  • ¥ CNY
  • kr SEK
  • CHF CHF
  • kr NOK
  • RM MYR
  • $ SGD
Request Quote

Holiday Shipping & Production Dates For 2024

4 Series Connected LUXEON Z 395nm Ultraviolet LEDs on a Saber Z5 20mm Base – 2500 mW @ 500mA

Regular Price: $78.71 /ea

The SZ-05-U5 LED module can produce 2500 milliwatts of light power when powered at 500mA, and with proper cooling can be pushed as high as 4752 milliwatts when powered at it&#39s maximum current rating of 1000mA.

With a 2.6mm square emitter area, this makes this LED module your best option for maximum light output from the smallest source.

This remarkable level of light power is accomplished with 4 tightly positioned, series connected, LHUV-0395-A060 395nm LUXEON Z LEDs soldered to a thermally efficient, 20mm (0.8″) square, 1.6mm (0.063″) thick MCPCB aluminum base.

SZ-05-U5

Discount Pricing

In Stock
1 Can ship immediately
Product Status
Discontinued when out of stock
Minimum order quantity
1
Manufacturer
Quadica Developments
Datasheet
Quantity Discount
10-24 5%
25-49 10%
50+ 15%

1 in stock

Configured Total

Compatible Products

App Notes

Specs

Drivers

Optics

Cooling

Documents & Compliance

Thermal Management

The SZ-05-U5 Saber Z5 LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

Bench testing that we have conducted with SZ-05 modules with all LEDs powered at 700mA in an open-air environment and an ambient temperature of 25°C has indicated that a heat sink with a thermal rating of 10 C°/W or lower should be adequate. However, you will need to perform your own testing and analysis to determine if this size of heat sink will be suitable for your application.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Optic Compatibility

The Saber Z5 has been specifically designed to accommodate any Carclo 20mm optic that can be mounted into the Carclo 20mm Pegged Foot Optic Holder.

We currently do not carry these optics; however, the Saber Z5 is also compatible with:

Mixed Color LEDs

Need different color LEDs mounted to a single Quad LED module? A color-mixing version of this module is available.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities of less than 500 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 500+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED Color
Radiometric Power @ mW mW
Peak Wavelength nm
Recommended Operating Current mA
Maximum Rated Drive Current mA
Maximum Pulse Current mA
Typical Forward Voltage Vf
Maximum Forward Voltage Vf
Wavelength Range to K
Beam Angle°
Thermal Resistance °C/W
Maximum Recommended Junction Temp °C
Operating Temperature Range to °C
Dimensions (L x W x H) x x mm
Weight g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SZ-05-U5 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics except the Polymer 15 mm optic are 100% compatible with the SZ-05-U5 LED module. Polymer 15 mm optics cannot be used if you select the connector option.

Note: The optics listed here may not be ideal for ultraviolet or infrared LEDs. You will need to test the optic for your specific application.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA

Thermal Management

The SZ-05-U5 Saber Z5 LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

Bench testing that we have conducted with SZ-05 modules with all LEDs powered at 700mA in an open-air environment and an ambient temperature of 25°C has indicated that a heat sink with a thermal rating of 10 C°/W or lower should be adequate. However, you will need to perform your own testing and analysis to determine if this size of heat sink will be suitable for your application.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Optic Compatibility

The Saber Z5 has been specifically designed to accommodate any Carclo 20mm optic that can be mounted into the Carclo 20mm Pegged Foot Optic Holder.

We currently do not carry these optics; however, the Saber Z5 is also compatible with:

Mixed Color LEDs

Need different color LEDs mounted to a single Quad LED module? A color-mixing version of this module is available.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities of less than 500 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 500+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED Color
Radiometric Power @ mW mW
Peak Wavelength nm
Recommended Operating Current mA
Maximum Rated Drive Current mA
Maximum Pulse Current mA
Typical Forward Voltage Vf
Maximum Forward Voltage Vf
Wavelength Range to K
Beam Angle°
Thermal Resistance °C/W
Maximum Recommended Junction Temp °C
Operating Temperature Range to °C
Dimensions (L x W x H) x x mm
Weight g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SZ-05-U5 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the SZ-05-U5 LED module.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA