$ USD
  • $ USD
  • $ CAD
  • € EUR
  • £ GBP
  • $ AUD
  • ₩ KRW
  • ¥ JPY
  • ₪ ILS
  • ¥ CNY
  • kr SEK
  • CHF CHF
  • kr NOK
  • RM MYR
  • $ SGD

Holiday Shipping & Production Dates For 2023

July 1, 2024, 8:00 PM MST - We are currently making changes to our product discounting system. Discounts may not be displayed or may be inaccurate.

Request Quote

Holiday Shipping & Production Dates For 2023

On August 20, 2023, the Luxeon Star LEDs website transitioned to a new hosting service. If you're a returning customer, you will need to reset your password to maintain your account security. You can reset your password here.

Red (627nm) LUXEON Rebel LED; Mounted on a 20mm Tri-Star Saber – 270 lm @ 700mA

Regular Price: $22.83 /ea

The MR-D2040-20T high power LED module features three LXM2-PD01-0040 high brightness Red Rebel LEDs soldered to a Saber 20mm Tri-Star MCPCB aluminum base. Each LED on this module is individually powered and controlled.

The aluminum base makes it easy to mount the LED to a suitable heat sink and to work with the LED module using standard benchtop soldering and hand tools.

Series connected & color mixing versions of this LED module are available.

GO SOLDER FREE!

Check out the no-solder version of this module

MR-D2040-20T

Discount Pricing

Built To Order Lead Time
5-15 Days
Product Status
Built to order
Minimum order quantity
1
Manufacturer
Quadica Developments
Quantity Discount
10-24 5%
25-49 10%
50-99 15%
100-249 20%
250-999 25%
1000+ 30%
Built To Order Lead Time
5-15 Days
Product Status
Built to order
Minimum order quantity
1
Manufacturer
Quadica Developments
Datasheet

Discount Pricing

Quantity Discount
10-24 5%
25-49 10%
50-99 15%
100-249 20%
250-999 25%
1000+ 30%
Configured Total

Compatible Products

App Notes

Specs

Drivers

Optics

Cooling

Documents & Compliance

Thermal Management

The MR-D2040-20T Saber LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Mixed Color LEDs

Need different color LEDs mounted to a single tri-star module? A color-mixing version of this module is available.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 330 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 330+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED ColorRed
Recommended Operating Current350 mA
Maximum Rated Drive Current700 mA
Maximum Pulse Current700 mA
Typical Forward Voltage6.3 Vf
Maximum Forward Voltage8.4 Vf
Lumens @ 350 mA144 lm
Lumens @ 700 mA273 lm
Wavelength Range620 to 645 K
Beam Angle125°
Thermal Resistance14 °C/W
Maximum Recommended Junction Temp135 °C
Operating Temperature Range-40 to 120 °C
Dimensions (L x W x H)20 x 20 x 5.0 mm
Weight1.2 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the MR-D2040-20T LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the MR-D2040-20T LED module.

Note: The optics listed here may not be ideal for ultraviolet or infrared LEDs. You will need to test the optic for your specific application.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA

Thermal Management

The MR-D2040-20T Saber LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Mixed Color LEDs

Need different color LEDs mounted to a single tri-star module? A color-mixing version of this module is available.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 330 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 330+ quantities, please contact us for binning details.

You can learn more about LED binning here.

LED ColorRed
Recommended Operating Current350 mA
Maximum Rated Drive Current700 mA
Maximum Pulse Current700 mA
Typical Forward Voltage6.3 Vf
Maximum Forward Voltage8.4 Vf
Lumens @ 350 mA144 lm
Lumens @ 700 mA273 lm
Wavelength Range620 to 645 K
Beam Angle125°
Thermal Resistance14 °C/W
Maximum Recommended Junction Temp135 °C
Operating Temperature Range-40 to 120 °C
Dimensions (L x W x H)20 x 20 x 5.0 mm
Weight1.2 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the MR-D2040-20T LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the MR-D2040-20T LED module.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA