0
$ USD
  • $ USD
  • $ CAD
  • € EUR
  • £ GBP
  • $ AUD
  • ₩ KRW
  • ¥ JPY
  • ₪ ILS
  • ¥ CNY
  • kr SEK
  • CHF CHF
  • kr NOK
  • RM MYR
  • $ SGD

On August 20, 2023, the Luxeon Star LEDs website transitioned to a new hosting service. If you're a returning customer, you will need to reset your password to maintain your account security. You can reset your password here.

0
Request Quote

On August 20, 2023, the Luxeon Star LEDs website transitioned to a new hosting service. If you're a returning customer, you will need to reset your password to maintain your account security. You can reset your password here.

5000K LUXEON Z White LED on a Saber Z1 10mm Square Base – 148 lm @ 500mA

Regular Price: $7.98 /ea

The SZ-01-M6 LED module features a single LXZ1-5070 5000K LUXEON Z LED soldered to a thermally efficient, 10mm (0.4″) square, 1.6mm (0.063″) thick MCPCB aluminum base with temperature test point.

This ready-to-use LED module offers both easy handling and a small size that can be worked with using standard benchtop tools and hand soldering techniques. This opens up new opportunities for makers, R&D, MRO and low to medium volume OEM manufacturers to use the super small series of LUXEON Z LEDs without the need for specialized pick and place equipment or reflow soldering.

SZ-01-M6

Discount Pricing

In Stock
5 Can ship immediately
Additional Stock Lead Time
2 to 3 Days
Product Status
Normally stocked
Minimum order quantity
1
Manufacturer
Quadica Developments
Datasheet
Quantity Unit Price
10 - 24 $7.58
25 - 49 $7.18
50 + $6.78
In Stock
5 Can ship immediately
Additional Stock Lead Time
2 to 3 Days
Product Status
Normally stocked
Minimum order quantity
1
Manufacturer
Quadica Developments
Datasheet

Discount Pricing

Quantity Unit Price
10 - 24 $7.58
25 - 49 $7.18
50 + $6.78

5 in stock

New Product total
New Options total
Configured Total

Compatible Products

App Notes

Specs

Drivers

Optics

Cooling

Documents & Compliance

Thermal Management

The SZ-01-M6 Saber Z1 LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Optic Compatibility

The Saber Z5 has been specifically designed to accommodate any Carclo 20mm optic that can be mounted into the Carclo 20mm Pegged Foot Optic Holder.

We currently do not carry these optics; however, the Saber Z5 is also compatible with:

Carrier Tab

Saber Z1 LED module carrier tab.The Saber Z1 is provided as part of a Carrier Tab. The tab is v-scored so that the LED module can be easily separated from the carrier.

The carrier tab makes it easier to handle the Saber Z1 during transport, storage, and module, minimizing the risk of damage to the LED emitting surface.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 2,000 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 2,000+ quantities, please contact us for binning details.

You can learn more about LED binning here.

 

LED ColorWhite
Recommended Operating Current500 mA
Maximum Rated Drive Current1000 mA
Maximum Pulse Current1200 mA
Typical Forward Voltage2.8 Vf
Maximum Forward Voltage3.25 Vf
Lumens @ 350 mA lm
Lumens @ 700 mA189 lm
Typical Wavelength5000 K
Color Rendering Index70 CRI
Beam Angle120°
Typical Forward Voltage2.8 Vf
Thermal Resistance8 °C/W
Maximum Recommended Junction Temp135 °C
Operating Temperature Range-40 to 135 °C
Dimensions (L x W x H)10 x 10 x 2.3 mm
Weight0.9 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SZ-01-M6 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the SZ-01-M6 LED module.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA

Thermal Management

The SZ-01-M6 Saber Z1 LED module requires careful attention to mounting and cooling to ensure that the junction temperature of the LED is kept well below the maximum rating specified in the Lumileds datasheet.

We recommend that the module be mounted to an aluminum or copper finned heatsink exposed to open air for optimal cooling. The module can be mounted to the heat sink in one of two ways:

Before fastening the module to the heat sink, ensure that the two mating surfaces are perfectly flat and clean to maximize heat transfer to the heatsink. Mechanical fasteners are not recommended for this module.

The bottom of the LED module is electrically neutral, so it is unnecessary to electrically isolate the base from the cooling surface.

Optic Compatibility

The Saber Z5 has been specifically designed to accommodate any Carclo 20mm optic that can be mounted into the Carclo 20mm Pegged Foot Optic Holder.

We currently do not carry these optics; however, the Saber Z5 is also compatible with:

Carrier Tab

Saber Z1 LED module carrier tab.The Saber Z1 is provided as part of a Carrier Tab. The tab is v-scored so that the LED module can be easily separated from the carrier.

The carrier tab makes it easier to handle the Saber Z1 during transport, storage, and module, minimizing the risk of damage to the LED emitting surface.

Stock

We usually keep a small number of this part in stock. However, we can produce virtually any quantity you require on demand. Please get in touch with us for lead times for orders above 1,000 pieces.

LED Binning

Order quantities less than 2,000 pieces are produced from unbinned stock (cut strips). We can supply binned LED modules (built from full reels)) If you order in 2,000+ quantities, please contact us for binning details.

You can learn more about LED binning here.

 

LED ColorWhite
Recommended Operating Current500 mA
Maximum Rated Drive Current1000 mA
Maximum Pulse Current1200 mA
Typical Forward Voltage2.8 Vf
Maximum Forward Voltage3.25 Vf
Lumens @ 350 mA lm
Lumens @ 700 mA189 lm
Typical Wavelength5000 K
Color Rendering Index70 CRI
Beam Angle120°
Typical Forward Voltage2.8 Vf
Thermal Resistance8 °C/W
Maximum Recommended Junction Temp135 °C
Operating Temperature Range-40 to 135 °C
Dimensions (L x W x H)10 x 10 x 2.3 mm
Weight0.9 g
Refer to the product datasheets for complete specifications.

A current-regulating LED driver is required between the power supply and the LED module to ensure that the LED is not powered above its maximum current rating. You can learn more about powering high-power LED modules here.

All drivers listed here are 100% compatible with the SZ-01-M6 LED module. The driver you select will depend on your specific requirements.

Product InformationStockPricehf:att:pa_output-currenthf:att:pa_connectionhf:att:pa_dimming

High-power LEDs include a primary optic for protection and light optimization. However, a secondary optic is often essential for better focus and light distribution.

All the optics listed here are 100% compatible with the SZ-01-M6 LED module.

Product InformationStockPricehf:att:pa_beam-typehf:att:pa_mounting

To maximize life and reliability, a heatsink or alternate method of cooling is required to ensure that the junction temperature of the LED is kept well below its maximum temperature rating. 

Refer to our Thermal Management articles for assistance selecting an appropriate heatsink from the available options here.

Product InformationStockPricehf:att:pa_length-hshf:att:pa_width-hshf:att:pa_height-hshf:att:pa_cw-filterhf:att:pa_fin-type
RoHS StatusRoHS 3 Compliant
REACH StatusREACH Uneffected
Conflict Minerals ReportCMRT Rev 6.22
Proposition 65 Statement
Proposition 65
PFAS DeclarationPFAS Declaration
ECCNEAR99
HTS8543.70.71.00
Country of OriginCA